Alvarion BreezeMAX Si 4000 CPE, User Manual

Page: 95 / 135

Chapter 7 - Setting Advanced Parameters IP Filter
BreezeMAX Si 4000 CPE 79 User Manual
7.6 IP Filter
You can block access to the Internet from clients on the local network by
specifying IP addresses and TCP/UDP port numbers. You can configure up to five
IP filters on the unit.
In the IP Filter page you set IP addresses to be filtered out by the security system.
You can add addresses to the filtered group or delete them. You can also enable or
disable filtering at different times.
The following configuration parameters are available:

Select - Select this check-box to delete this entry.

IP Range - Specify an IP address or range on the local network. (Range:
192.168.254.1 to 192.168.254.254)

Port Range - Enter the port range to be filtered

Protocol - set the protocol to be filtered: TCP (default) or UDP.
Figure 7-5: Advance - IP Filter