Alvarion BreezeACCESS Wi2, System Manual

Page: 39 / 252

Installation Requirements
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 17
„
8 dBi Omnidirectional antenna(s)*
„
Sectoral antenna(s), including RF cable with N-Type connector*
„
UL/CSA listed smooth circular power cable, 1.5mm to 2.5mm each. Outer diameter 7mm to
9mm, UV resistant, temperatures range -40
0
C to +65
0
C min. Other specifications (such as oil
resistance, no of wires) according to specific installation requirements.
„
A mains plug for connecting to AC mains
„
Two terminal rings if connecting to a DC source
„
Grounding cable with an appropriate termination.
„
Installation tools and materials, including appropriate means for installing the Wi² and
antenna(s).
„
A PC with an Ethernet NIC for configuring basic parameters of the WiFi AP and the SU-ODU,
and a b/g WiFi card for testing wireless connectivity to the AP.
„
Wall - Tilt Pole Mounting kit* ( page 28 )
„
DC power connector* (pack of 5)
„
Waterproof covers for AC/DC socket* (pack of 5)
2.2.3 Guidelines for Positioning Wi²
NOTE
Before starting to install the Wi² unit, check that you have all the necessary parts and accessories.
Optional accessories marked with an asterisk (*) can be ordered from your supplier.
CAUTION
ONLY experienced installation professionals who are familiar with local building and safety codes
and, wherever applicable, are licensed by the appropriate government regulatory authorities should
install outdoor units and antennas.
Failure to do so may void the product warranty and may expose the end user or Service Provider to
legal and financial liabilities. Alvarion and its resellers or distributors are not liable for injury, damage
or regulation violations associated with the installation of Outdoor Units or antennas.