Supervisor 5000 Installation Instructions
Page 4
For assistance: [email protected] +1 (909) 591-8431 PUD3667R1-6
Installation Tools
•
Tape Measure
•
Chalk Line
•
Pencil
•
Hammer Drill
•
5/8" Concrete Drill Bit
•
Shop Vac
•
Hammer
•
3/32" Allen Wrench
•
9/16" Wrench
•
Torque Wrench (ft-lbs.)
•
Torque Wrench (in-lbs)
•
9/16" Socket
•
Level
•
5/32" Allen Wrench
•
#2 Phillips Head Screwdriver
•
Precision Flat Head Screwdriver
•
M4 'Stubby' Allen Wrench
(Supplied)
•
Clear RTV Silicone
This product is shipped with all installation hardware and components. If installing a single lane, refer to the Single Lane Parts List
below. For additional lanes, refer to the Center Cabinet Parts List. Make sure that none of these parts are missing and/or damaged
before beginning installation. If parts are missing and/or damaged, please contact Alvarado.
End covers ship taped to the turnstile cabinets.
(Barrier height and width may vary.)
Single Lane Parts List
Concrete Anchor Package:
Hardware:
Cabling:
Software:
Parts List
Uncrating
•
⅜" x 2½" Hex Head Cap Screws (Qty 16)
•
Barrier Clamp Bar Screws (Qty 8)
•
⅜" Flat Washers (Qty 16)
•
⅜" x 2" Concrete Anchors (Qty 16)
•
Barrier Clamp Bars (Qty 2)
•
8' Crossover Cable (Qty 1)
•
File Management CD (Qty 1)
The SU5000 has been packed for shipping to prevent damage to the unit. Two or more installers are required
to unload the SU5000 at the installation site. Once the turnstile cabinets have been placed in the installation
location, carefully remove the protective packing material from the sides of the cabinets.
Master Cabinet
(Qty 1)
Slave Cabinet
(Qty 1)
End Covers
(Qty 4)
Barriers
(Qty 2)
Cabinet Lids
(Qty 2)
Master Cabinet Base Cover
(Qty 1)
Slave Cabinet Base Cover
(Qty 1)
NOTE
Summary of Contents for SU5000
Page 44: ......
