Page 36 [email protected] +1(909) 591-8431 www.alvaradomfg.com
Installation Instructions
n
Appendix B - CLST Installation
1.
Determine where the turnstile will be installed. Consider
the overall footprint size of the unit when determining
the installation location (Figure B1). Once the installation
location has been determined, use a chalk line to mark
the centerline of the turnstile.
Default entry rotation is counterclockwise. Confirm correct
entry direction prior to installation.
Yoke Installation
Follow the steps shown in Appendix A
(Figures A2 - A8). When complete, refer to the "OV
Installation" to continue the installation.
Yoke
(Qty 1)
Roto
(Qty 1)
OV
(Qty 1)
CLST Illustrated Parts List
Fig. B1
Yoke Mounting Channel
(Qty 4)
Channel Mounting Screws
(Qty 8)
Entry Side
(Unsecured)
Exit Side
(Secured)
63.25"
(1607mm)
30.5"
(775mm)
Bottom Bearing
Plate Center
CL
8.00"
(203mm)
Yoke Half
Section
Yoke Half
Section
29.50"
(749mm)
29.50"
(749mm)
These instructions are for installing the yoke section of the CLST. When complete, please refer back to the "OV
Installation" section.
CLST Installation Instructions
NOTES
The overall height of the CLST is 91.5".
However, an additional 3" of clearance must be
added for service and maintenance.
32.75"
(832mm)
30.00"
(762mm)
29.63"
(752mm)
