CONTROL UNITS СU-TR230 / СU-TR400
111
111
SETTINGS
6.5
CYCLE COUNTER DATA
Y
The number of completed cycles in a six-digit form is displayed in the setting when changing
the display inscription (maximum 999,999 cycles).
The example shows the counter value 123 456 cycles:
.
Table 1
6
1
Press and hold
for ~5 s, until entering the setting menu
5 s
2
After the inscription
P1
appears, press
3
After the inscription
P0
appears, press
4
After the inscription
F0
appears, press
5
After the inscription
F1
appears, press
6
The display will show two digits with two dots (for example,
1. 2.
).
These are the first two digits of the counter.
In order to see the next two digits of the counter (third and fourth)
press
7
The display will show the next two digits with one dot in the middle
(for example,
3. 4
).
In order to see the last two digits of the counter (fifth and sixth)
press
8
The display will show the last two digits with one dot at the end
(for example,
5 6.
).
Using
or
it is possible to see the counter digits again
9
To exit the setting menu, press 3 times
×3
Summary of Contents for CU-TR230
