Verify proper installation and operation using the panel’s installation manual.
Installation
1. Power down the .
2. Open the cover.
3. Unplug the battery cord.
4. Unplug the power cord.
5. Insert the RE934Z into expansion slot 3 of the , gently inserting the connector and
snapping the stand-offs into place.
6. Connect battery cord, plug the power, and close the cover to the .
RE934Z Z-Wave Expansion Card
adds home automation capability to the
system. The system will be able to start or join an existing Z-Wave network,
and control Z-Wave capable 3rd party devices.
Features
• Expansion Card that plugs into the / BAT-Connect
• Provides communications with Z-Wave devices enabling a broad
range of home automation features
Installation
1. Power down the system.
2. Insert the Z-Wave Expansion Card.
3. Power up the system.
RE934Z Z-Wave
™
Expansion Card
™
Encrypted
IN
STALL
G
U I D E
I
LED
Indication
Power
(Green)
ON -
When system is AC powered
OFF -
When system does not have AC power
Z-Wave
(Red)
(Normally) OFF -
flashes with each Z-Wave message received from system
:
Insert the RE934Z into expansion slot 3 of the , gently inserting the
connector and snapping the stand-offs into place.
BAT-Connect:
Insert the RE934Z into expansion Module Slot of the BAT-Connect, gently
inserting the connector and snapping the stand-offs into place.
SLOT 1 SLOT 2
SLOT 3
BACKUP
BATTERY
Connect Family
BAT-Connect
