PINPad
is a simple arming station that allows local
control of the security system. It is battery powered
and requires no installation tools. Many can be
installed throughout the home to provide convenient
system control.
Features
• Secure 4 to 10 digit disarming
• Supports 1-button arming
• Small yet comfortable
• 5 year warranty
Enroll
by placing the panel into wireless enrollment
mode and then sending an enrollment signal from the
PINPad. Alternatively, the PINPad can be enrolled
by scanning its bar code using the Installer
App or by entering its 8-character serial number on
the interactive service provider’s web portal.
Option for sending an Enrollment Signal
• Press
1
and
3
buttons simultaneously
Install
using the 3M VHB® tape on the back of the
PINPad to adhere it to a wall.
• See Pro Tips for recommendations about using
3M VHB
tape.
• Two #4 or #6 screws may be used instead of,
or in addition to, the 3M VHB tape.
• The mounting plate can also be rotated 180
°
for table top use (See Pro Tips).
Operate
using the PINPad buttons. The PINPad LED
will blink when a button is activated.
Disarm
by entering a valid 4-10 digit user code on
the number pad.
Arm Away
by pressing the
AWAY
button until the
PINPad LED flashes red.
Arm Stay
by pressing the
STAY
button until the
PINPad LED flashes red.
Trigger a panic alarm
by pressing the
STAY
&
AWAY
buttons together until the Red PINPad LED
flashes repeatedly.
Use the panel installation guide to verify proper system setup.
Enrollment Buttons
Arm Stay
Arm Away
LED
Mounting Screw Holes
VHB Tape
VHB Tape
RE652 PINPad
™
™
Encrypted
IN
STALL
G
U I D E
I