SN0108 / SN0116 User Manual
76
Target List
The left side panel displays all the devices that were found with the
Enumeration
function, as well as any devices that were manually added with
the
Target Information
fields.
Note:
Double clicking an item in the list invokes the same function as
selecting
Enum Ports
–which displays the numbers and working modes
of the selected target’s ports in the
Port List
column.
If a device was automatically listed as a result of the
Enumeration
procedure, the icon to its left is drawn with green dots and lines to show
that the target is on line and is ready to be mapped.
If a device was added to the list manually and is off line, the icon to its left
is drawn with black dots and lines. Double clicking a manually added item
can get some information and display it in the
Port List
, but the working
mode information is not accurate and we must assume that all the device’s
ports are in Virtual Port mode. See
, page 34 for details
about port modes.
If the target is off line or is on line but does not respond within 2 seconds
of asking to enumerate its ports, the working mode information is not
accurate and we must assume that all the device’s ports are in Virtual Port
mode. See
, page 34 for details about port modes.
sn816.book Page 76 Thursday, January 8, 2009 4:56 PM
