Chapter 6. Out of Band Operation
61
PPP (Dial In) Connection
This type of connection works directly through the COM port.
Direct PPP Connection
Setup:
To set up a direct PPP connection, do the following:
1. Use Ethernet cable a DTE-to-DTE adapter to connect one of the SN0108 /
SN0116's serial ports to a COM port on a PC (refer to
, page 11 or
SN0108D / SN0116D PC Installation
if necessary).
Note:
1. See
, page 92, for details on choosing the
adapter. The usual choice for connecting to a PC is SA0141.
2. In the examples that follow we use COM1. If you use a different
COM port, change the settings accordingly.
2. On your PC, run the
Make New Connection
setup program:
Start
→
Programs
→
Accessories
→
Communications
→
Make New Connection
The following dialog box appears:
3. Key a descriptive name for the connection in the top text box; select
Standard 28800 bps Modem
for the device; then click
Configure
.
sn816.book Page 61 Thursday, January 8, 2009 4:56 PM
