Chapter 5. The Windows Client
63
(Continued from previous page.)
If you find the default Hotkey combinations inconvenient, you can re-
configure them by following these five steps:
1. Highlight the Action, and then Click
Start
.
2. Key in the Function keys (one at a time). The key names appear in the
Key
field as you press them.
3. When you have finished keying in your sequence, Click
Stop
.
4. Click
Set
.
Repeat for any other actions for which you wish to re-assign
Hotkeys.
5. Click
Close
.
Note:
You can use the same function keys for more than one action,
as long
as the first key is not the same
. For example, you can use
F1 F2 F3
for
one action;
F2 F1 F3
for another;
F3 F2 F1
for a third, etc.
Video Adjustment
You can adjust the placement and the picture quality of the remote screen (as
displayed on your local monitor) with the Video Options function. To do so,
either click on the Hammer icon on the Control Panel, or use the
Adjust Video
hotkeys (see
, page 61). The following screen appears:
kn9108_9116_2007-09.book Page 63 Friday, September 21, 2007 10:39 AM
