Altusen KL9108, User Manual

Page: 28 / 158

KL9108 / KL9116 User Manual
16
Single Stage Installation
In a Single Stage installation, there are no additional switches daisy chained
down from the first unit. To set up a single stage installation, refer to the
installation diagram on the following page (the numbers in the diagram
correspond to the numbers of the installation steps) and do the following:
1. ( Optional ) If you choose to install an external console, plug your
keyboard, monitor, and mouse into the Console Ports located on the
KL9108 / KL9116’s rear panel. The ports are color coded and marked with
an icon to identify themselves.
2. Using a KVM cable set (see Cables , page 6), plug the custom SPHD
(yellow) connector into any available KVM port on the switch.
3. At the other end of the cable, plug the keyboard, video (blue), and mouse
connectors into their respective ports on the computer.
4. Plug the cable from the LAN into the LAN port on the KL9108 / KL9116’s
rear panel.
5. Connect the power cord provided with this package to an AC source and
the KL9108 / KL9116’s power socket.
Repeat steps 2 – 5 for any other computers you wish to install.
After you are all cabled up, you can power on the switch. After the switch is
powered on, power on the computers.
Note: Although the KL9116 is pictured in the diagram, the installation process
is the same for the KL9108.