Altusen KH1508a, User Manual

Page: 46 / 82

KH1508
A
/ KH1516
A
User Manual
36
F7: SCAN
This function automatically switches among the available computers at regular
intervals so that you can monitor their activity without having to take the
trouble of switching manually.
Š The selection of computers to be included for Auto Scanning is made with
the
Scan/Skip mode setting under the F3 SET function (see page 29).
Š The amount of time that each port displays for is set with the Scan
Duration setting under the F3 SET function (see page 28).
Š As each computer is accessed, an appears in front of the port ID
display to indicate that it is being accessed under Auto Scan mode.
Š While you are in Auto Scan mode, you can pause the scanning in order to
keep the focus on a particular computer either by pressing
P , or with a left
click of the mouse. To resume scanning, press any key or left click again.
See
Auto Scan Mode Switching , page 42, for details.
Š While Auto Scan mode is in effect, the console will not function normally.
You must exit Auto Scan mode in order to regain control of the console.
Š To exit Auto Scan mode, press the [Spacebar] or [Esc].
S