Altusen KH1508a, User Manual

Page: 41 / 82

Chapter 4. OSD Operation
31
F4: ADM
F4 is an administrator only function. Accessing this function allows the
administrator to configure and control the overall operation of the OSD. To
change a setting double click it; or use the up and down arrow keys to move the
highlight bar to it, then press
[Enter] .
After you select an item, a submenu with further choices appears. Double click
the choice you want, or move the highlight bar to it, then press
[Enter] . An icon
appears before the selected choice. The settings are explained in the table on
the next three pages:
Setting Function
SET USER
ACCOUNT This function is used to set usernames and passwords for the
administrator and users:
Š
One Administrator and 10 user passwords can be set.
Š
After you select the administrator field or one of the user fields, a
screen that allows you to key in your username and password
appears. The username and password may be up to 16 characters
long, and can consist of any combination of letters and numbers (A–
Z, 0–9).
Š
For each individual, key in the username and password, then press
[Enter] .
Š
To modify or delete a previous username and/or password, use the
backspace key to erase individual letters or numbers.
Š
The icon indicates data is stored in the account.
SET
ACCESSIBLE
PORTS This function allows the administrator to define user access to the
computers on the installation on a port-by-port basis.
For each user, select the target port, then press the [Spacebar] to cycle
through the choices:
F (Full access), V (View Only), or N (No Access).
Repeat until all access rights have been set, then press [Esc]. The
default is
F for all users on all ports.
Note: An N setting means that no access rights are granted. The port
will not show up on the user's LIST on the Main Screen.