Altusen ALTUSEN KN2116 Page 69 User Manual Download

Page: 69 / 141

Chapter 3. Administration

Upgrading the Firmware

As new versions of the KN2108 / KN2116 firmware become available, they
can be downloaded from our website. Check the web site regularly to find the
latest information and packages.

Note:

Although upgrading the firmware isn’t on the OSD Administration
page, it is an administration function, so we will discuss it in this
chapter.

To upgrade the firmware, do the following:

1. Download the new firmware file to a computer that is not part of your

KN2108 / KN2116 installation.

2. From that computer, open your browser and log in to the KN2108 / KN2116.

3. Click the

Firmware

icon (see p. 56) to open the Firmware configuration

dialog box:

4. Click

Browse

; navigate to the directory that the new firmware file is in

and select the file.

5. Click

Upload

6. After the upload completes, click the Logout icon at the top right of the

web page to exit and reset the KN2108 / KN2116.

kn2116.book Page 53 Thursday, July 10, 2008 4:05 PM

Summary of Contents for ALTUSEN KN2116














































































































































Search results

Summary of Contents for ALTUSEN KN2116

Reviews:

Related manuals for ALTUSEN KN2116

Brands by name

Popular brands

Altusen ALTUSEN KN2116, User Manual

Search results

Summary of Contents for ALTUSEN KN2116

Reviews:

Related manuals for ALTUSEN KN2116

Brands by name

Popular brands