KN2108 / KN2116 User Manual
112
Sun Systems
Note:
These solutions work for most common Sun VGA cards. If using them
fails to resolve the problem, consult the Sun VGA card's manual.
Panel Array Mode
Problem
Resolution
Video display
problems with HDB15
interface systems (e.g.
Sun Blade 1000
servers).
The display resolution should be set to 1024 x 768 @ 60Hz:
Under Text Mode:
Go to OK mode and issue the following commands:
setenv output-device screen:r1024x768x60
reset-all
Under XWindow:
1. Open a console and issue the following command:
m64config -res 1024x768x60
2. Log out
3. Log in
Video display
problems with 13W3
interface systems (e.g.
Sun Ultra servers).
The display resolution should be set to 1024 x 768 @ 60Hz:
Under Text Mode:
Go to OK mode and issue the following commands:
setenv output-device screen:r1024x768x60
reset-all
Under XWindow:
1. Open a console and issue the following command:
ffbconfig -res 1024x768x60
2. Log out
3. Log in
Problem
Resolution
Low resolution video
Increase the number of panels that are displayed.
When multiple remote users
are logged in, some of them
only receive a partial image.
The first user to invoke Panel Array Mode should set
it to display at least four panels.
kn2116.book Page 112 Thursday, July 10, 2008 4:05 PM
