Altusen ALTUSEN KL3116T, User Manual

Page: 51 / 93

Chapter 4. OSD Operation
41
(Continued from previous page.)
Setting Function
EDIT PORT
NAMES To help remember which computer is attached to a particular port,
every port can be given a name. This function allows the
administrator to create, modify, or delete port names. To edit a port
name:
1. Click the port, or use the navigation keys to move the highlight bar
to it, then press [Enter] .
2. Key in the new port name, or modify/delete the old one. The maxi-
mum number of characters allowed for the port name is 12. Legal
characters include:
Š
All alpha characters: A – Z
Š
All numeric characters: 0 – 9
Š
* ( ) + : - , ? . / and Space
Case does not matter; OSD displays the port name in all
capitals no matter how they were keyed in.
3. When you have finished editing, press [Enter] to have the
change take effect. To abort the change, press [Esc] .
RESTORE
DEFAULT
VALUES This function is used to undo all changes and return the setup to the
original factory default settings (see
OSD Factory Default Settings ,
page 68) except for the port name list, username and password
information, which are saved.
CLEAR THE
NAME LIST This function clears the port name list.
ACTIVATE
BEEPER Choices are Y (on), or N (off). When activated, the beeper sounds
whenever a port is changed; when activating the Auto Scan function
(see
F7: SCAN , page 45); or an invalid entry is made on an OSD
menu. The default is Y .
SET QUICK
VIEW PORTS This function lets the administrator select which ports to include as
quick view ports.
Š
To select/deselect a port as a quick view port, double click the port,
or use the navigation keys to move the highlight bar to it, then press
[Spacebar] .
Š
When a port has been selected as a quick view port, an icon dis-
plays in the QV column of the LIST on the main screen.
Š
If one of the quick view options is chosen for the LIST view (see F2
LIST , page 35), only a port that has been selected here
will display on the list.
Š
If one of the quick view options is chosen for auto scanning
(see
SCAN–SKIP MODE , page 37), only a port that has been
selected here will be auto scanned.
The default has no ports selected for quick view.
kl3116-3116t.book Page 41 Wednesday, June 1, 2011 1:28 PM