manualshive.com logo in svg

Altusen ALTUSEN CC2000, User Manual, Page: 20 / 271

Share
Download
Altusen ALTUSEN CC2000 User Manual Download Page 20

CC2000 User Manual

6

Client Requirements

Hardware Requirements

Š

CPU: For best results we recommend that the computers used to access the 
switch have at least a P III 1 GHz processor, with their screen resolution 
set to 1024 x 768.

Š

Memory: At least 512MB (1GB or more recommended)

Š

Ethernet: At least 1 Ethernet adapter – 10Mbps or higher – 100Mbps 
recommended

Š

Browsers must support 128 bit SSL encryption.

Š

For the browser-based Java Applet Viewer the latest version of the Java 
Runtime Environment (JRE) must be installed.

Š

At least 205MB of memory must be available for the first viewer after 
logging in from the browser and 100MB for each additional viewer that is 
opened, thereafter.

Operating Systems

Š

Supported operating systems for client workstations that connect to the 
CC2000 are shown in the table, below:

Š

Supported operating systems for users that log into the CC2000 include 
Windows 2000 and higher, and those capable of running the Java Runtime 
Environment (JRE) 6, Update 11, or higher.

Note:

The Windows 2000 Client does not support the WinClient Viewer.

OS

Version

Windows

2000 and higher

Linux

RedHat

7.1 and higher

Fedora

Core 2 and higher

SuSE

9.0 and higher

Mandriva (Mandrake) 9.0 and higher

UNIX

AIX

4.3 and higher

FreeBSD

4.2 and higher

Sun

Solaris 8 and higher

cc2k.book  Page 6  Tuesday, December 21, 2010  4:00 PM

Summary of Contents for ALTUSEN CC2000
















































































































































































































































































Reviews:

No comments