manualshive.com logo in svg

Altusen ALTUSEN CC2000, User Manual, Page: 183 / 271

Share
Download
Altusen ALTUSEN CC2000 User Manual Download Page 183

Chapter 7. System Management

169

Backup Device Configuration/Account Information

When you choose the 

Backup device configuration/account information 

task, 

the following page appears:

1. Provide a name for the task and a password.

Note:

Make a note of the password and store it in a safe place. You will 
need it when restoring the configuration/account information. 
See

Restore device configuration

, page 101 for restoration details.

2. In the 

Device List

, put a check in the box in front of the name of the device 

you want to back up, then click 

Next

.

3. Make your schedule choices in the 

Schedule 

page that comes up.

Note:

The schedule choices are similar to the ones described for the 

Backup master server database

 task. Refer back to page 162 for 

details, if necessary.

4. When you have completed your schedule choices, click 

Next

.

The procedure completes and you return to the 

Tasks

 main page. The 

Backup device configuration/account information 

task, configured 

according to the choices you made, is now added to the Sidebar and the 
Task List:

cc2k.book  Page 169  Tuesday, December 21, 2010  4:00 PM

Summary of Contents for ALTUSEN CC2000
















































































































































































































































































Reviews:

No comments