Altuscn KN2116a, User Manual, Page: 74 / 306

KVM Over the NET™ User Manual
58
Macros
The Macros icon provides access to three functions found in the
Macros dialog box: Hotkeys, User Macros, and System Macros. Each
of these functions is described in the following sections.
Hotkeys
Various actions related to manipulating the remote server can be accomplished
with hotkeys. The
Hotkey Setup utility (accessed by clicking this icon), lets you
configure which hotkeys perform the actions.
The hotkeys that invoke an action are shown to the right of its name. Use the
checkbox to the left of an action’s name to enable or disable its hotkey.
To change the hotkey for an action, do the following:
1. Highlight the Action , then click Set Hotkey .
2. Press your selected Function keys (one at a time). The key names appear in
the Hotkeys field as you press them.
Š
You can use the same function keys for more than one action, as long
as the key sequence is not the same.
Š
To cancel setting a hotkey value, click Cancel ; to clear an action’s
Hotkeys field, click Clear .
3. When you have finished keying in your sequence, click Save .
To reset all the hotkeys to their default values, click Reset .