Altuscn KN2116a, User Manual, Page: 222 / 306

KVM Over the NET™ User Manual
206
Panel Array Mode
Clicking the toolbar's Panel icon invokes Panel Array Mode. Under this mode,
the screen divides into a grid of up to 42 panels:
Š
Each panel represents one of the switch’s ports beginning with Port 1 at
the upper left, and going from left to right; top to bottom.
Š
The number of panels in the array can be selected by clicking the Show
More Ports , and Show Fewer Ports symbols on the panel array toolbar
(see the following page for an explanation of the panel array toolbar).
Š
When the Array is first invoked, it scans through each of the ports that
were selected for Auto Scanning with the
Filter function (see Filter ,
page 91). As it scans, the border of the panel that has the focus becomes
highlighted.
Š
Only ports that are accessible to the user are displayed. For ports that are
not accessible, the panel is blank.
Š
If the server connected to a port is on line, its screen displays in its panel,
otherwise the panel is blank.
Š
Mousing over a panel displays information about the port (port name,
online status, port access status, and resolution).
Š
You can access a server connected to a port by moving the mouse pointer
over its panel and clicking. You switch to the server exactly as if you had
selected it from the Port Access page.