Altuscn KN2116a User Manual Download Page 112

Page: 112 / 306

KVM Over the NET™ User Manual

Port Level

When a port is selected in the Sidebar, the

Connections

page changes to display

the port connection and configuration options:

The screen is divided into three major panels, as described in the sections that
follow.

Status

The Status Panel displays the port’s current status information, including
whether the port is online or offline, and if the port is mountable.

Click the

Connect

button to view the port display via the switch’s built-in Win

Viewer (when using Windows Internet Explorer), or Java Viewer (when using
other web browsers).

Associated Links

The Associated Links panel displays ports that have been associated with the
currently selected port. Associations are configured on the

Port Access

→

Port

Configuration

→

Associated Links

page (see page 123 for details).

Summary of Contents for KN2116a



















































































































































































































































































































Search results

Summary of Contents for KN2116a

Reviews:

Altuscn KN2116a, User Manual, Page: 112 / 306

Search results

Summary of Contents for KN2116a

Reviews: