Altuscn KM0032, User Manual, Page: 142 / 155

KM0032 / KM0532 / KM0932 User Manual
130
Sun Systems
* These solutions work for most common Sun VGA cards. If these procedures
fail to resolve the problem, consult the manual for the Sun VGA card.
Problem Solution
Video display problems
with HDB-15 interface
systems (e.g. Sun Blade
1000 servers). The display resolution should be set to 1024 x 768 @
60Hz.
Under Text Mode:
1. Enter the
ok
prompt (see below) and issue the follow-
ing firmware commands:
setenv output-device screen:r1024x768x60
reset-all
Under XWindow:
1. Open a console and issue the following command:
m64config -res 1024x768x60
2. Log out.
3. Log in.
Video display problems
with 13W3 interface
systems (e.g. Sun Ultra
servers).* The display resolution should be set to 1024 x 768 @
60Hz.
Under Text Mode:
1. Enter the
ok
prompt (see below) and issue the follow-
ing firmware commands:
setenv output-device screen:r1024x768x60
reset-all
Under XWindow:
1. Open a console and issue the following command:
ffbconfig -res 1024x768x60
2. Log out.
3. Log in.
I am using a PC keyboard
to control a Sun Solaris
server and want to use
Stop-A keys to enter the
ok
prompt.
Do the following:
1. Press and release [Ctrl]
2. Press and hold down [T]
3. Press [A] .
Note: Before entering the
ok
prompt, consult the server’s
documentation for any precautionary steps that you
should take.