Altronix Pace1STR Installation Manual Download Page 1

Overview:

Pace1STR is a long range Ethernet adapter kit that transmits data at 100Mbps full duplex and 
power via CAT5e or higher cable in a PoE(+) compliant format. Pace1PRM receiver is powered 
via a PoE midspan, such as the Altronix Netway series, or by an endspan. The receiver passes the 
PoE(+) compliant power over the cable to the Pace1ST mini transceiver which, in turn, passes this 
power to an enabled IP camera/device. These plug and play units facilitate cost-effective solutions 
for IP devices that need to be installed at distances greater than 100m.

Features:

Rev. 022015

Installation Guide

Pace1STR

IP and PoE+ over extended distance CAT5e

Kit includes Pace1PRM Receiver and Pace1ST Mini Transceiver

Agency Listings:

•  UL/cUL Listed for Information 
  Technology Equipment (UL 60950-1).
•  CE approved.

Input (Pace1PRM):

•  Powered by midspan or endspan.
  PoE compliant to IEEE 802.3af (15W) and
  PoE+ compliant to IEEE 802.3at (30W).

Ethernet:

•  Connectivity: RJ45, auto-crossover.
•  Wire type: 4-pair CAT5e or higher.
•  Distance: up to 500m.
• Speed: 10/100BaseT, half/full duplex, auto  
  negotiation. PoE compliant to IEEE 802.3af  
  (15W) and PoE+ compliant to IEEE 802.3at  
  (30W) delivered to camera by Pace1ST.  
  Power provided by Pace1PRM to Pace1ST  
  by PoE protocol.*
•  Throughput is rated to pass 100Mbps of  
  data at distances up to 500m.
  With proper headend equipment this 
 supports 

Megapixel, HD720, HD1080.

CAT5e or Higher:

•  Distance: up to 500m @ 100Mbps
  (see Maximum Length of CAT5e Type vs.
  Camera Power/PoE Class, pg. 3).

LED Indicators:

• 

Pace1PRM and Pace1ST:

  Green - PoE ON (by respective RJ45 jack).
• 

Pace1PRM and Pace1ST (RJ45 jack):

  Yellow and Green LED IP Link status,
 10/100Base-T/active.

Environmental:

• 

Operating Temperature:

 

Pace1PRM:

  --- 20ºC to 49ºC (-- 4ºF to 120.2ºF).
 Pace1ST:
  For 15W: --- 40ºC to 75ºC (--- 40ºF to 167ºF).
  For 30W: --- 40ºC to 49ºC (--- 40ºF to 120ºF).
• 

Storage Temperature:

  --- 40ºC to 75ºC (-- 40ºF to 167ºF).
•  Relative humidity: 
  20 to 85%, non-condensing.

Functions:

•  Auto detection and protection of legacy
  non-PoE cameras/devices.

Applications:

•  Retrofit digital IP cameras in an analog  
  CCTV CAT5e installations.
•  Extend Network link distance in an 
  industrial environment over 610m.
•  Works with Megapixel, HD720, HD1080  
  and VGA (SD) cameras with proper 
  headend equipment.

Mechanical:

•  Dimensions (W x L x H approx.):
 

Pace1PRM:

  3.5” x 3.5” x 1” 
  (88.9mm x 88.9mm x 25.4mm).
 

Pace1ST:

  2.27” x 2.645” x 1.12” 
  (57.7mm x 67.2mm x 28.4mm).

I.T.E.  43KC

*See note on Page 2.

Reviews: