1
LED Work Light
I
NSTALLATION
G
UIDE
PREFACE
About this Guide
The document provides basic information on installation instructions for a qualified, trained
installer. Please read all warnings, notices, and instructions in this guide before installing or
using this product.
Retain this guide for future reference
.
Have a question regarding this guide?
The material in this guide is for information purposes only and is subject to change without
notice. Altman Lighting assumes no responsibility for any errors or omissions which may
appear in this guide.
Should you find an error, have a suggestion or question regarding your Altman Lighting
product, we would love to hear from you.
You can reach us at:
Altman Lighting
57 Alexander Street
Yonkers, New York 10701
1.914.476.7987 (Main)
1.914.963.7304 (Fax)
www.altmanlighting.com
[email protected]
Note:
Information contained in this document may not be duplicated in full or in part by any person without prior written approval of
Altman Lighting. Its sole purpose is to provide the user with conceptual information on the equipment mentioned. The use of this
document for all other purposes is specifically prohibited.
Our Commitment
Altman Lighting continually engages in research related to product improvement. New materials, production methods and design
refinements are introduced into existing products without notice as a routine expression of the philosophy. For this reason any current
Altman Lighting product may differ in some respect from its published description, but will always equal or exceed the original design
specifications unless otherwise noted.
Document Number:
49-0410
Version as of:
26 October 2018
LED Work Light Installation Guide
©2018 Altman Lighting. All rights reserved.
IMPORTANT INFORMATION
Product Safety Notices
When using electrical equipment, basic safety precautions should always be followed including the following:
a.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
.
b. Do not use outdoors unless the product is specified to operate in outdoor environments.
c. Do not mount near gas or electric heaters.
d. Equipment should be mounted in locations and at heights where it will not readily be subjected to tampering by
unauthorized personnel.
e. The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition.
f. Do not use this equipment for other than intended use.
g. Refer service to qualified personnel.
SAVE THIS GUIDE FOR FUTURE REFERENCE.
