10
operation
poWer on and charGinG
Bluetooth
®
Setup
Press and hold the button for 2-3 seconds to turn the
speaker on/off. When on, a notification sound will go
off and the
and buttons will light up. The button
will flash indicating it is ready to pair with a Bluetooth
®
device.
To charge the speaker, plug one end of the supplied
micro USB cable to the micro USB port on the speaker.
Connect the other end of the cable to a power source.
When charging, the charging LED indicator will light up
red and turn off once the speaker is fully charged.
On your Bluetooth
®
device, look for ATBTS-SCA in the list
of detected devices, and pair with it. Once successfully
paired, a notification sound will go off and the
button
will light up white. If asked for a password, enter 0000.
The speaker and your Bluetooth
®
device will remember
each other and automatically connect when they are
both turned on.
Summary of Contents for ATBTS-SCA
Page 1: ...atBTS sca bluetooth speaker USER manual ...
Page 18: ...18 notes ...
Page 19: ...19 notes ...
