SPECIAL APPLICATION
400-0431-001
8
Cause 4:
Video equalization required.
Solution:
Adjust the VIDEO EQUALIZATION
on the TP115-110. Long cable runs
may require adjustment on both the
TP115-110
and TP115-111.
In general, cable runs less then 50
feet
require little or no video
equalization and should be set to
minimum. Cable runs up to 400 feet
will require near maximum
equalization on both the transmitter
and receiver.
Cause 5:
The display has a problem.
Solution:
Make sure the display has power
and is turned ON. If there is still no
display, please call Altinex at
(714) 990-2300.
8.2 NO SOUND
Cause 1:
The source has a problem.
Solution:
Check the source and make sure
that there is a signal present and all
source connections are correct. If
the source is working and there is
still no sound, see Cause 2.
Cause 2:
The volume is too low.
Solution:
Increase the gain at the source
toward maximum. If there is still no
sound present, see Cause 3.
Cause 3:
Cable connections are incorrect.
Solution:
Make sure that cables are properly
connected. Also, make sure that the
continuity and wiring are good. If
there is still no sound, see Cause 4.
Cause 4:
The receiving device has a
problem.
Solution:
Make sure the receiving device has
power and is turned on. If there is
still no sound, please call Altinex at
(714) 990-2300.
ALTINEX POLICY
9
9.1 LIMITED WARRANTY/RETURN POLICY
Please see the Altinex website at
www.altinex.com
for details on warranty and
return policies.
9.2 CONTACT INFORMATION
ALTINEX, Inc.
592 Apollo Street
Brea, CA 92821 USA
TEL:
714 990-2300
TOLL FREE:
1-800-ALTINEX
WEB:
www.altinex.com
E-MAIL:
