INPUT MODULE
400-0113-003
2
PRECAUTIONS / SAFETY WARNINGS
1
Please read this manual carefully before using your
ISV3000
. Keep this manual handy for future
reference. These safety instructions are to ensure
the long life of your
ISV3000
and to prevent fire
and shock hazards. Please read them carefully and
heed all warnings.
1.1 GENERAL
•
Unauthorized personnel shall not open the unit
since there are high-voltage components inside.
•
Qualified ALTINEX service personnel or their
authorized representatives must perform all
service.
1.2 INSTALLATION
•
For best results, place the module on a flat, level
surface in a dry area away from dust and
moisture.
•
To prevent fire or shock, do not expose this unit
to water or moisture. Do not place the
ISV3000
in direct sunlight, near heaters or heat-radiating
appliances, or near any liquid. Exposure to
direct sunlight, smoke, or steam can harm
internal components.
•
Handle the
ISV3000
carefully. Dropping or
jarring can damage internal components. Do not
place heavy objects on top of the
ISV3000
.
•
Never install the
ISV3000
in the same enclosure
with high voltage wires or their associated
components such as power sockets, dimmers,
or switches. Always use proper isolation
techniques to ensure that the
ISV3000
is never
installed in an enclosure that has high voltages
present.
1.3 CLEANING
•
Clean surfaces with a dry cloth. Never use
strong detergents or solvents such as alcohol or
thinner. Do not use a wet cloth or water to clean
the unit.
1.4 FCC NOTICE
•
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
•
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the interference
at his own expense.
•
Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could void
the user’s authority to operate the equipment.