
-
29
-
Maintenance after submersion in salt water
CAUTION
Salt deposits must be removed from the filter after submersion in salt water. Failure
to remove salt deposits may lead to the filter becoming blocked and serious lag
may occur in freefall as a result.
To remove salt deposits submerge the altimeter in clean fresh water for
approximately 10 minutes. Agitate occasionally. Remove from water, shake off
excess and allow to air dry.
Do NOT touch the filter. Doing so may cause irreparable damage to your Neptune.
The speaker cavity is sealed internally. If water comes out of that area, keep
shaking until there appears to no more water in the speaker cavity.
WARNING
PARACHUTING IS A HAZARDOUS ACTIVITY THAT CAN RESULT IN INJURY OR DEATH.
An altimeter is a device subject to malfunction, even when properly designed, built, assembled, maintained and used. Do not
rely upon an altimeter for your safety. Your altimeter must only be considered as an aid when checking your altitude.
A visual cross reference with the ground should be used in combination with any altimeter.