-
27
-
Training Mode
To access Training Mode, go to Menu >
System > Modes > Setup Training.
Edit the desired exit and deployment altitudes
in the same way alarm altitudes are set, and
then select “Exit”.
To enter Training Mode, select “Training”. There
are three options: “High Speed Mal”, “Low
Speed Mal” and “Normal Sim”, each
corresponding to one of the three Neptune
buttons.
The countdown at the bottom of the screen
displays how much time there is remaining until
the Neptune exits the Training Mode screen.
When you select any of the Training simulations, the Neptune will display a screen
that looks like Freefall Mode, starting at the exit altitude you set. When it reaches
your selected deployment altitude, it will switch to a screen that looks like Canopy
Mode, and descend at the rate you selected (high, low, or normal speed).
CAUTION
Training Mode is intended only for ground training.
WARNING
PARACHUTING IS A HAZARDOUS ACTIVITY THAT CAN RESULT IN INJURY OR DEATH.
An altimeter is a device subject to malfunction, even when properly designed, built, assembled, maintained and used. Do not
rely upon an altimeter for your safety. Your altimeter must only be considered as an aid when checking your altitude.
A visual cross reference with the ground should be used in combination with any altimeter.