manualshive.com logo in svg

Altera Nios II Embedded Evaluation Kit Cyclone III Edition, User Manual, Page: 71 / 80

Share
Download
Altera Nios II Embedded Evaluation Kit Cyclone III Edition User Manual Download Page 71

Altera Corporation 

Development Board Version 1.0.

 

D–1

July 2010

Appendix D. Frequently

Asked Questions

This section below explains the frequently asked questions of Nios II 
Embedded Evaluation Kit.

Why is my SOF time-limited? 

Several IP cores in the example designs (Nios II processor core, DDR 
SDRAM memory core, TSE MAC core) are evaluation versions available 
as OpenCore Plus IP cores. OpenCore Plus hardware evaluation supports 
the following two modes of operation:

●

Tethered

—requires a JTAG connection between your board and 

the host computer. If tethered mode is supported by all 
megafunctions in a design, the device can operate for a longer 
time or indefinitely 

●

Untethered

—the design runs for a limited time 

To generate non time limited SOF files you will need to purchase shipping 
licenses for any OpenCore Plus IP cores in your system. Contact your 
local sales offices to purchase the license. 

http://www.altera.com/corporate/contact/con-index.html

What are Ready-to-Run Demonstrations?

Ready-to-run demonstrations are binary (flash) files of processor systems 
that can be programmed to flash or selected and loaded from the LCD 
touch panel. Ready-to-run demonstrations provide a quick and easy way 
to evaluate Nios II based processor systems built for applications such as 
automotive graphics, industrial controls, consumer graphic user 
interfaces and more.

Most ready-to-run demonstrations have been provided by Altera's 
partners and showcase IP, operating systems and software tools. 

Where can I find Ready-to-Run Demonstrations?

For the Nios II Embedded Evaluation Kit (NEEK), there are many 
ready-to-run demonstrations available on the sd-card. A menu listing all 
the demonstrations stored on the SD-Card appears when the NEEK is 
first powered up. The ready-to-run demonstrations that you see on the 

Summary of Contents for Nios II Embedded Evaluation Kit Cyclone III Edition

















































































Reviews:

No comments