Installation Instructions for Slip Fitter Mount:
1. Ensure that the lamp pole diameter is less than the diameter of the connection tube
diameter of 2 1/2”. Loosen screws on connection tube.
2. Adjust the lighting angle as needed utilizing the slip fitter adjustment.
3. Connect the input and ground wires of the fixture to the power supply.
Brown is live. Blue
is neutral. Green/Yellow is ground.
4. Place lamp pole into connection tube and tighten screws.
5. The angle of the slip fitter mount can be adjusted from +90° through -90°.
6. Restore Power
5/6
