![background image](http://html.mh-extra.com/html/altec-lansing/track-fit/track-fit_quick-start-manual_2909786001.webp)
1. Ma
2. For a look at the various buttons and parts on your earphones, view the graphic
below.
ke sure the following items are included in your package.
MZX799 Track-Fit
Sports Earphones
Charging Dock
Ear Caps
Item # MZX799
Quick Start Guide
3.
Charging:
Use the included charging dock to charge your earphones.
To charge, make sure that the charging contacts on your earphones touch
the charging terminals on the dock. When charging, a red LED indicator light will
illuminate on the charging dock. When charging is complete, the LED indicator light
will turn off. Your earphones can take up to two hours to charge.
4.
Powering ON/Powering OFF Your Earphones:
6.
Wearing Your Earphones
7.
Listening to Music
8.
Using Your Earphones During Phone Calls
9.
Using the Built-In Step Tracker
TRACK-FIT
Play/Pause
Press the Power button to get music from your audio source to play or pause.
Next/Previous Song
Double tap the Volume Up or Volume
Down buttons to advance to the next song
or go back to the previous one.
Increase/Decrease Volume
Tap the Volume Up or Volume Down
buttons to increase or decrease the
volume.
NOTE: Music will automatically pause when
a call is dialed out or when there is an incoming
call. It will resume when the call ends.
For the best sound performance and a secure, comfortable fit, be sure that the
Your earphones have a built-in step tracker which will keep track of approximately
how many steps you have walked, kilometers you have travelled and calories you
have burnt. To turn on the built-in step tracker follow the steps below:
1. Power on your earphones, and pair them with your Bluetooth phone.
2. Press and hold the Volume Up button and your earphones will begin tracking
your steps, kilometers travelled, and calories burnt.
3. Press and hold the Volume Up button again at any time and you will be updated
audibly so that you can keep track of your progress.
4. Press and hold the Volume Down button to stop tracking your measurements and
clear all data. Similarly, all data will be cleared if you power your earphones off.
ear buds rest gently in your ear and drape around the back of your neck. Use the
ear caps that works best for you.
-Press and hold the Power button for approximately 3-5 seconds to power on
your earphones. Your earphones will automatically connect with the last phone
they were paired with if they have previously been paired.
-Once powered on, you can press and hold
the Power button again for approximately
three seconds to power off your earphones.
NOTE: In order to save power, your earphones
for several minutes.
~ 3-5 Seconds
Press & Hold to Start Tracking
Press & Hold to Clear Data
USB Cable
Last Number Redialing
Quickly tap on the Answer button twice and the last number that you dialed will be
redialed.
Answering an Incoming Call
To answer an incoming call, quickly
press the Answer button.
Ending a Call
To end a call, quickly press the Answer
button, and the call will be disconnected.
Adjusting Volume
By pressing the Volume Up or Volume
Down buttons you can increase or decrease
the volume of the phone call.
SPORTS EARPHONES
1. Earloop
2. Ear Tips
6. Volume Up/Next Track
7. Power/Answer
8. Volume Down/Previous Track
5. Charging Contacts
3. Microphone
4. LED Indicator Light
Charging
Contacts
LED
Indicator
Light
Charging
Terminals
5.
Pairing Your Earphones With a Bluetooth Phone
Altec track fit
1
2
3
4
5
6
7
8
-Immediately after powering on your earphones, the
LED Indicator Light will alternately flash red and
blue to indicate that your earphones are ready to be
paired.
-Go to the Bluetooth Manager on your phone.
Search Bluetooth devices and select “Altec track fit”
to start connecting. Once paired, the LED indicator
light will stop blinking and steadily shine blue. Note
that anytime music is playing, the LED indicator light
will slowly blink blue every few seconds.