Altec AIR
P4200W Series Air Dryer User’s Guide
Page 25 of 113
P012306 - Rev. F
8.2 Connecting an Air Line to the Dryer
8.2.1
Remove the Red Orifice
Plug from the Outlet Pressure
Port.
CAUTION
: Be careful when
removing plug. System may be
pressurized.
8.2.2
Connect the air supply line to the Outlet Pressure Port.
ALTEC AIR recommends using Installation Kit P011752 to connect your air
dryer to the air supply line (See section 11.6 for detail).
8.3 Powering the Dryer ON & OFF
8.3.1
Power Circuit Breaker -
Controls the main power to
the dryer.
CAUTION!
Incoming power to dryer must be:
15 amp service recommended
110 - 125 VAC, 50/60 Hz for P4200W & P4200WLP
models
220 - 230 VAC, 50/60 Hz,
1 Phase
for P4202W &
P4202WLP models
Summary of Contents for PUREGAS P4200W Series
Page 2: ......
