Headphone Manual:
1
、
Hold the ”ON/OFF” approx. 3 seconds to turn on the headphone. The light will turn to
red and flash. On the contrary, hold the on/off approx 3 seconds, turn off the power.
2
、
Use the USB cable (14) and connect a computer to the transmitter (8); switch the Audio
Select (13) in the down side, and the LED light(7) of transmitter will flash.
3
、
Hold the “Scan” button of headphone (2) and transmitter (11) for approx. 3 seconds at
the same time. The headphone will have “toot toot toot…” sound, then, release the
buttons. The headphone and transmitter has ready to pair up. Once you pair up, you don’t
need to pair it again.
4
、
When play music, the headphone LED will go red (3), so as the transmitter LED (7).
5
、
If you want to pause music, hold the RF ON/OFF button (12) approx 1 second; If you
want to continue music, hold the RF ON/OFF button again