19 |
P a g e
3.2 Heating system
Turn on / off heating by setting heater's power manually in the Novus
instrument display (
see section 5.2, Climate
).
Heater’s temperature and fan speed is controlled by climate controller
.
NOTE
Using more heater's power will decrease the driving range.
Additional coolant heater
Vehicle could be equipped with an additional coolant heater.
The controller is turned on when the vehicle ignition is activated. It controls
the coolant heater automatically when the temperature is set.
Temperature controller functions
▪
UP key: when pressed for at least 5 seconds, a manual defrost is
started with programmed duration (in thermostats function). In
programming, it increases the displayed value.
▪
DOWN key: in programming, it reduces the displayed value.
▪
SET key: when pressed for at least 5 seconds, it displays the SET
POINT temperature value (in thermostats function). In programming,
it saves the programmed new value.
▪
LED 1: defrost in operation indicator (in thermostats function).
▪
LED 2: relay ON indicator. (in thermostats function). It indicates when
heating is active.
▪
LED 2 flashing: programming mode.