Altair ALT1210MOD-VZ-01, User Manual, Page: 8 / 18

ALT1210MOD-VZ-01 User Module Rev 1.0
Altair Semiconductor Proprietary and Confidential 8
2.2. Interfaces
SPI
X
1 , 4-pin SPI
UART
X
2 ,Max throughput 1mbps
E-SIM 1.8V only, external pull-up/down resistor
required for clock stop mode
QSPI Flash Interface for external serial flash (required for
module operation) and for internal flash
(required for calibration data storage)
HS USB 2.0
Used for production and debug
2.3. Electrical Specification
Item Min Typ Max Units Notes
Required Power Supplies Rating
VBAT 3.2 3.8 4.3 V If USB interface is not used the
Vin voltage can be further
reduced up to 3.0V
I
VBAT
400 mA
VPA 3.0 3.3 4.3 V
I
VPA
350 mA For 23dbm max output power
1v8_IO_IN 1.71 1.8 1.89 V
I
1v8_IO_IN
50 mA IOs consumption is less than
50mA
VDD_RET_IN 1.71 1.8 1.89 V
I
VDD_RET_IN
150 mA
Radio Performance
Max TX power for B13 22 23 25 dBm Not including MPR rules
Max TX power for B4 22 23 25 dBm Not including MPR rules
Sensitivity B13 -94 -96 dBm 10MHz, MCS5, single antenna
Sensitivity B4 -94 -96 dBm 10MHz, MCS5, single antenna