ALT1210MOD-VZ-01 User Module
Rev 1.0
Altair Semiconductor Proprietary and Confidential
18
5.
Regulatory Compliance
5.1.1.
FCC
Please notice that if the FCC identification number is not visible when the module
is installed inside another device, then the outside of the device into which the
module is installed must also display a label referring to the enclosed module. This
exterior label can use wording such as the following: “Contains FCC ID:
2AN5Z-
001R1
” any similar wording that expresses the same meaning may be used.
Manual Information to the End User:
1.
The ALT1210MOD-VZ-01 module is limited to OEM installation ONLY.
2.
The OEM integrator should provide a user manual that should clearly indicate
the operating requirements and user guidelines.
3.
The OEM is responsible for ensuring that the end-user has no manual
instruction to remove or install the module.
4.
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it should be installed and operated with a
minimum distance of 5.3 cm between the radiator and an extremity (such as
an arm) or 7.9 cm between the radiator and the body. If an end product
incorporates this module in a configuration where it would be closer to an
extremity or the body (a portable/wearable device) then SAR testing would be
required. The integrator is responsible for ensuring compliance in the host,
which could involve power reduction control.
5.
This transmitter module has not been evaluated for simultaneous operation
with other transmitters. In a multi-transmitter integration scenario, an
evaluation must be performed to ensure RF Exposure compliance. The
integrator is responsible for ensuring compliance in the host.
5.1.2.
GCF
This device complies with the 3GPP Rel 9 specification.
5.1.3.
Verizon wireless conformance
This device complies with Verizon Wireless conformance