Altai Technologies Ltd. All rights reserved
C1n Series WIFI AP/CPE Web-admin Configuration Manual
TPS15-003_rev1.3
4.
Click
Submit
5.
Click
Save&Apply
to apply
6.3.1.
Trap Host Setting
User may click “
” to specify the SNMP manager if necessary.
Figure 6-4 SNMP Trap Host
Enable Trap
: Enable or Disable a particular trap host.
Trap Host ID
: SNMP Trap host ID; C1n supports maximum 4 Trap Host.
Trap Host
: Specify IP address of SNMP manager.
Trap Port
: Specify the service port of SMNP Trap service, by default it is 162
Trap Community
: Specify the string of trap community information.
Configure a trap host in C1n:
1.
Select
Administration
SNMP
, then click “
”
2.
Check
Enable Trap
3.
Specify the IP address in
Trap Host
4.
Specify the port number of
Trap Port
5.
Specify the community string in
Trap Community
that is identical in the NMS’s
setting.
6.
Click
Submit
7.
Click
Save&Apply
to apply
6.4.
Certificate Management
