1
Altai Technologies Ltd. All rights reserved
AX500 Series Installation Manual
1.
Introduction
Thank you for purchasing Altai AX500 Series products. This manual is intended for field support engineers and
installers who are responsible for installing the products on site. Users who perform the tasks should read
through this document and also be familiar with the hardware and software capabilities of the products.
This document applies to the following models and associated hardware versions.
Product Name
Model Name
H/W Versions
AX500 Outdoor 2x2 802.11a Wave 2 Access Point
AX500-S
1.0 or above
AX500-T
1.0 or above
AX500-X
1.0 or above
There are 3 AP models for AX500 Series.
(1)
AX500-S
: Integrated-antenna AP model designed to provide long range and wide beam (120
degree) of sector coverage.
(2)
AX500-T
: Integrated-antenna AP model designed to provide 360 degree coverage.
(3)
AX500-X
: External-antenna AP model which is designed to provide more flexibility for deployment to
meet various purposes and requirement. You can choose omni antennae or sector antennae for
access coverage; or choose panel antennae or parabolic antennae for bridge link setup.
It is assumed that site survey has already been performed. Appropriate antenna pole or AP locations have
been selected. It is highly recommended that cable lengths of various cables are confirmed. Good site
installation plan should consist of site maps or drawings illustrating AP and poles locations, antenna
orientation including bearing/down-tilt, antenna height, and network topology.
User may also refer the following documents during AX500 installation and configuration if necessary.
(1)
Altai AP Web UI Configuration Manual
(2)
AX500 Outdoor 2x2 802.11a Wave 2 Access Point Data Sheet
