10
Altai Technologies Ltd. All rights reserved
AX500 Series Installation Manual
4.
Preparation of AX500 Installation
Throughout the installation guide, we use the following tools and accessories for AX500 installation. Please
make sure to get them ready prior to site installation.
Tools:
Drill with drill bits (for concrete wall mount installation)
Hammer (for concrete wall mount installation)
Screwdriver (Slot type and Phillips type)
Adjustable wrench
Scissors and blade cutter
Wire stripping tool and crimping tool
Waterproof rubber mastic tape and electrical tape
Accessories:
10 AWG Ground Wire x 1 pcs
Ethernet Cable x 2 pcs
For the best practice, we
STRONGLY
recommend you get the AX500 configuration done in the office first
and leave the fine-tuning work on site to save effort and time. You can also perform some basic tests to
make sure the desired features function properly before taking it out to the site.
