manualshive.com logo in svg

Alstom iSTAT M355, Manual, Page: 26 / 154

Share
Download
Alstom iSTAT M355 Manual Download Page 26

M3x5/EN M/B 

User Manual

 
Page 24 

 

iSTAT M3x5

 

 

FIGURE 8-11: RS232/RS485 CONNECTIONS 

A second RS232/RS485 port (COM2) may also be available depending on which RTC 
synchronization method is used (see section 8.9). 

8.6.2 

Ethernet Communications 

The 

M3x5

 can be supplied with an Ethernet port, which is always supplied alongside an USB 

port.  This option will have a rear mounted RJ45 Ethernet connecter, along with an USB 
connector. 

Both of the Ethernet and USB ports can be used simultaneously allowing interrogation locally 
and remotely at the same time. 

Note that each 

M3x5

 will have a unique MAC number indicated on the label that can be used 

when configuring for Ethernet communications.   

 

FIGURE 8-12: ETHERNET/USB 

8.6.3 

USB Communications 

The 

M3x5

 can be supplied with a USB port, via a rear mounted USB type B connector. 

USB communication serves as a fast peer-to-terminal data link. The instrument is detected 
by the host as a USB 2.0 compatible device.    

If both Ethernet and USB ports are fitted they can be used simultaneously allowing 
interrogation locally and remotely at the same time. 

 

FIGURE 8-13: USB 

 

8.7 

Inputs and Outputs – Main modules 1 & 2 

The 

M3x5 

can be supplied with two main input/output modules, designated 1 & 2, situated 

on the rear of the case. Each of these modules has 2 channels and can be factory 
configured to one of the options shown in table 8-2: 

Summary of Contents for iSTAT M355



























































































































































Reviews:

No comments