GEM80-500 Series Controller
2. Specification
(08/04)
GEM80-500 Technical Manual (T2025En)
Page 2-1
2. Specification
2.1 Introduction
The GEM80-500 Series Controller specification is detailed in this section. There are
also application dependent requirements which affect operation of the controller and
these are described at Section 6 where full installation instructions are included.
2.2 Environmental
Specification
Operating
Temperature
0
to
+50
°
C
Humidity
5
to
95%
RH
(non-condensing)
Atmospheric contamination
The controller must be totally protected from
potentially
corrosive
atmospheres
e.g.
benzene,
acid
fumes,
sulphur
dioxide,
hydrogen
sulphide
and
nitrous
oxide
Notes:
(1)
Additional protection should be provided to prevent dust ingress when the
controller is used in high dust concentration locations (Enclosure is IP20 – see
Mechanical Specification).
(3)
Rapid temperature changes should be avoided to prevent condensation forming
in areas of high humidity.
Storage and Transport
Temperature
-20
°
to +70
°
C
Humidity
5
to
95%
RH
(non-condensing)
2.3 Mechanical
Specification
Enclosure Ingress Protection (IP)
IP20 (to IEC 60529)
Size (H x W x D)
235 mm x 141 mm x 173 mm
Size with Panel Mounting Kit
235 mm x 170 mm x 181 mm
Weight
2.5 kg (
without
optional modules)
Weight
3.0 kg (
with
optional modules)
Mounting
Subrack
or
Panel
mountable
(see
Installation)
Optional Panel Mounting Kit
8890-4900