Device User’s Guide
3. System Configuration
16
Plastic cuvette
Cuvette used for absorbance, transmittance, fluorescence and concentration of gas or
liquid samples measurement. Other 10 mm square cuvettes, in glass quartz or similar, can
be for the measurement.
SMA905 adaptor for light source
It is used as a fitting when connecting SEC 2023 cuvette holder and fiber with SMA905
connector.
SMA905 adaptor for light shielding
When measuring with the SEC2023 cuvette holder, it is used to block the external light.
Hexagon wrench
It is used for loosen of the fixing screw attached to the housing of the collimator lens, to
adjust the focal position of the collimator lens. The 0.89 mm wrench corresponds to a
collimator, and the 1.50 mm wrench corresponds to a fiber collimator.
Figure 3-13: SMA905 adaptor for light source
Figure 3-14: SMA905 adaptor for light shielding
Figure 3-12: Trigger cable
