If this product does not meet your expectations upon
delivery or does not live up to the demands placed upon
it, please return it within 3 years of purchase for repair,
replacement or refund. If the problem is our fault then
we will do this to your satisfaction, if it’s your fault we will
help the best we can!
Email: [email protected]
Phone: +44(0) 1773 417007
Website: alpkit.com/support
IMPORTANT:
Thank you for purchasing the Alpkit Elan. Please curtail
your excitement and do not use this product until you have
read, understood, and complied with all the instructions and
warnings contained within this manual.
Introducing your new Elan Hooped
Bivvy Bag. a lightweight and
breathable hooped bivvy to weather
out the worst storms and ensure a
dry night wherever you camp.
ELAN
PITCHING INSTRUCTIONS
1.
2.
3. Align the pole ends with the metal eyelets at the ends of the
pole sleeve. [Fig 2]
Erect the canopy by carefully pushing into the sleeves from
the other end, it does not matter which pole is first.
4.
WARNING
This Bivvy Bag is NOT fireproof and will burn in seconds if
Do not cook in your Bivvy Bag.
Do not place hot appliances close to the walls or roof of your
Bivvy Bag, observe safety warnings for any appliances and do
not allow children to play near them.
Keep exits of Bivvy Bag free from obstructions and woodland
creatures, they will steal your food.
Maintain adequate ventilation at all times, death by
suffocation is possible. Always store any cheesy socks in
vestibules or outside the Bivvy Bag.
Anchor your Bivvy Bag carefully at all times: the use of pegs
is recommended, anchors are very heavy.
Choose your campsite wisely, be aware of the possibility of
and airborne whales.
Go Nice Places, Do Good Things.
Using an additional footprint/tarp provides extra protextion if
pitching on rough or boggy ground,
falling rocks and trees, lightning, flash floods, avalanches
exposed to flame or excessive heat.
Ensure the ground is free from sharp objects and rocks that
may damage your groundsheet.
Lay the Bivvy Bag on the ground and peg it out at the bottom
two corners. Assemble the two poles and thread them
through the pole sleeves. [Fig 1]
(2)
(1)
