2-36
Performing an Exam
Measurement and Report
Basic Measurement Operations
To begin the measurement,
1
1
On the control panel, press the
[Caliper]
key.
2
2
Use
[Trackball]
to move the point.
3
3
Press the
[Set]
key to fix the point.
To modify a measurement,
1
1
Click the result value you want to change from the
Result
window. The caliper is
activated.
2
2
Use
[Trackball]
to change the measurement value and press the
[Set]
key.
–
To switch the caliper mark of the current value, press the
[Caliper]
key when the
caliper is active.
–
To activate the caliper of another value, press the
[Priority]
key repeatedly until the
desired value is highlighted.
To delete a measurement,
1
1
Click the result value you want to delete from the
Result
window. The caliper is
activated.
2
2
Press the
[Clear]
key on the control panel.
To exit, press the
Exit
key on user-defined key or
[2D]
key on the control panel.
Measurement Result Window
The
Result
window displays the measurement result.
Icon
Description
Change the background type (e.g. transparent or opaque) of the
Result
window.
Change the position of the
Result
window.
View the mini report.
Summary of Contents for X-CUBE 70
Page 1: ...DIAGNOSTIC ULTRASOUND SYSTEM X CUBE 70 Quick Guide Rev 0 ENG D N 70003656 ...
Page 10: ......
Page 14: ......
Page 46: ......
