manualshive.com logo in svg

Alpine SPT-31GM, Installation Manual

Share
Download
Alpine SPT-31GM Installation Manual Download Page 1

Chevrolet/GMC

FULL SIZE TRUCK 

˜

 1/14

SPT-31GM
Speaker System for 
Chevrolet/GMC 
Installation Manual

˜

 Model: Select GM Trucks and SUVs

˜

 Model Year: 2014-up Trucks

Introduction

˜ 

Design and specifications are subject to change without notice for improvement.

To Ensure Safe Use, Always Follow These Precautions

˜ 

The installation of this product requires specialized skills and experience. We recommend that you have the 

product installed by an authorized Alpine dealer.

˜ 

Before you use this product, be sure to carefully read this installation manual and the separate user's manual 

so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as 
a result of failure to follow the instructions in the manuals.

˜ 

This manual includes a number of symbols that are intended to help you use the product safely, to prevent 

harm to you and others, and to protect against damage to property. These symbols and their meanings are 
listed below. Make sure you fully understand these symbols before you begin reading the main text.

Explanations of Injury and Damage That May Result from Incorrect Use

 Warning

Ignoring the content marked by this indication and using the product incorrectly is 
expected to lead to death or serious injury.

 Caution

Ignoring the content marked by this indication and using the product incorrectly is only 
expected to lead to injury or property damage.  

Compatible Vehicles*

Year

Model

Configuration

Trim

Chevrolet

2014-up

Silverado 1500

Double Cab

WT, LS, Custom, LT, LTZ

Crew Cab

WT, LS, LT, LT Z71, LTZ, LTZ Z71

Silverado 2500HD

Double/Crew Cab

WT, LT, LTZ

Silverado 3500HD

Double/Crew Cab

WT, LT, LTZ

GMC

2014-up

Sierra 1500

Double/Crew Cab

Sierra, SLE, SLT

Sierra 2500HD

Double/Crew Cab

Sierra, SLE, SLT

Sierra 3500HD

Double/Crew Cab

Sierra, SLE, SLT

*  The specified vehicles have been tested and have met compatibility specifications at the time of testing. 

Compatibility is not guaranteed if the manufacturer has made production changes to the vehicles listed above.  

Factory systems equipped with Bose are not compatible with this system.

Summary of Contents for SPT-31GM















Reviews:

No comments

Brands by name

Popular brands

Load more brands