35
-EN
•
When OFF is selected, MX effect of each MX mode will be OFF.
•
Each music source, such as radio, CD and MP3/WMA/AAC can have
its own MX setting.
•
MX mode does not function when MX is ON for MW, LW radio.
•
MX CMPM is applied for MP3/WMA/AAC and iPhone/iPod.
•
The MX setting can be performed only when a source is currently
selected.
You can modify the Equalizer settings to create a response curve more
appealing to your personal taste.
Setting item: P-EQ
1
Select L+R by touching
[
]
of P-EQ.
When graphic EQ is set to L+R, this setting will be turned off.
2
Touch
[
]
of P-EQ after selecting L+R.
The P-EQ list screen appears.
3
Adjust the P-EQ to your preference.
Adjusting the Band
Touch
[
]
or
[
]
of BAND to select the band to be adjusted.
BAND1 / BAND2 / BAND3 / BAND4 / BAND5
Adjusting the Frequency
Touch
[
]
or
[
]
of Freq. to adjust the frequency of the
selected band.
Adjustable frequency bands:
20 Hz to 20 kHz (in 1/3 octave steps)
Band-1: 20 Hz~80 Hz (63 Hz)
Band-2: 50 Hz~200 Hz (150 Hz)
Band-3: 125 Hz~3.2 kHz (400 Hz)
Band-4: 315 Hz~8 kHz (1 kHz)
Band-5: 800 Hz~20 kHz (2.5 kHz)
Adjusting the Level
Touch
[
]
or
[
]
of Level to adjust the level of selected
band.
Adjustable level: –6 to +6 dB
Setting the Bandwidth
Touch
[
]
or
[
]
of Q to select the bandwidth.
Adjustable bandwidth: 1, 1.5, 3
4
To adjust another band, repeat step 3 and adjust all
bands.
•
The frequencies of adjacent bands cannot be adjusted within 4 steps.
•
While adjusting the Parametric EQ, you should consider the
frequency response of the connected speakers.
•
When the parametric EQ is adjusted, the adjustment for graphic EQ
becomes ineffective.
You can modify the equalizer settings to create a response curve more
appealing to your personal taste.
Setting item: G-EQ
1
Select L+R by touching
[
]
of G-EQ.
When parametric EQ is set to L+R, this setting will be turned
off.
2
Touch
[
]
of G-EQ after selecting L+R.
The G-EQ list screen appears.
3
Adjust the G-EQ to your preference.
Adjusting the Band
Touch
[
]
or
[
]
of BAND to select the band to be adjusted.
BAND-1 (63 Hz) / BAND-2 (150 Hz) / BAND-3 (400 Hz) /
BAND-4 (1 kHz) / BAND-5 (2.5 kHz) / BAND-6 (6.3 kHz) /
BAND-7 (17.5 kHz)
Adjusting the Level
Touch
[
]
or
[
]
of Level to adjust the level of selected
band.
Adjustable output level: –6 to +6 dB
4
To adjust another band, repeat step 3, and then
adjust all bands.
•
When graphic EQ is adjusted, the adjustment for parametric EQ
becomes ineffective.
You can change the unit, (cm or inch) of time correction.
Touch
[
]
or
[
]
of T.Corr Parameter to select cm or Inch.
Setting item: T.Corr Parameter
cm
Inch
Adjusting the Parametric Equalizer Curve
(P-EQ)
Adjusting the Graphic Equalizer Curve
(G-EQ)
Setting the Time Correction Unit (T.Corr
Parameter)
cm:
The unit of time correction is cm.
Inch:
The unit of time correction is Inch.
