IVA-D310R/IVA-D310RB
No.
Symbol
I/O
Terminal Description
46
DVD-STS
I
Serial data (status) signal input terminal from DVD Mechanism.
(EPF III communication)
47
DVD-CMD
O
Serial data (command) signal output terminal to DVD Mechanism.
(EPF III communication)
48
DVD-SCK
O
Serial communication synchronous clock output terminal to DVD Mechanism.
(EPF III communication)
49
ACC-ON CONT
O
ACC ON power supply control output terminal.
50
BUZZER
O
BUZZER signal output terminal.
51
PWR-ON CONT
O
DVD system PWR-ON power supply control output terminal.
52
LCDAV+5V CONT
O
LCD VISUAL 5V power supply control output terminal.
53
AV+8V CONT
O
VISUAL BUFF system 8V power supply control output terminal.
54
AV+7V/5V CONT
O
AV +7V/+5V power supply control output terminal.
55
AV-5V CONT
O
AV -5V power supply control output terminal.
56
DC/DC+15V/-10V CONT
O
DC/DC +15V/-10V power supply control output terminal.
57
IS-FIN
I
FRAME-IN signal terminal for IS-BUS communication.
58
BL+9V CONT(NC)
-
No connect terminal.
59
FFB-CONT1
O
Force feedback control signal-1 output terminal.
60
PORTVDD1
-
Power supply terminal for Port. (P00-P03, P10-P17, P30-P37, P100-P107,
P110-P117) (connect to VDD+5V)
61
DF B/G DIMMER
O
Blue/Green LED control PWM output terminal. (FRONT DF side)
62
MTR-3
O
Motor control-3 terminal.
63
REMOCON IN
I
Remote Control signal input terminal.
64
MTR-4
O
Motor control-4 terminal.
DF RED DIMMER (#1)
O
Red LED control PWM output terminal. (FRONT DF side)
NC ($1)
-
No connect terminal.
66
R.REM-IN
I
Rear Remote Control input terminal.
67
FFB-CONT2
O
Force feedback control signal-2 output terminal.
68
CLOSE ACT LED
O
Action LED control signal (PWM) output terminal. (FRONT MOI side)
69
SUB-STBY
I
Stand-by signal input terminal from MAIN u-COM.
70
71
72
GND2
-
GND connect terminal.
73
74
75
MNI(NC)
-
No connect terminal.
76
BL-PWM
O
PWM signal output terminal for backlight lighting adjustment.
77
FFB-CONT3
O
Force feedback control signal-3 output terminal.
78
DIMMER-IN
(PULL-DOWN)
-
Pull-down connect terminal.
79
VLCD-CONT
O
LCD brightness power supply control output terminal (PWM). (FRONT DF side)
80
ZX3
81
ZX2
82
ZX1
83
V-MUTE IN
I
Visual MUTE signal input terminal from DVD Mechanism.
84
DAC-M LATCH
O
Latch control output terminal to DAC.
85
DAC-M DATA
O
Control data output terminal to DAC.
86
DAC-M CLK
O
Control clock output terminal to DAC.
87
OSD-RESET
O
RESET signal output terminal to OSD/Flash Memory.
88
N/P-SEL
O
NTSC/PAL switching signal output terminal. (H : NTSC, L : PAL)
89
REM-SEL
O
Remote Control signal output control terminal.
90
Y/COMP-SEL
O
Brightness signal / composite signal switching signal output terminal.
(H : Y, L : Composite)
NOTE : #1 : For IVA-D310R Model Only, $1 : For IVA-D310RB Model Only, Others : Common.
O
Crystal connect terminal for sub clock OSC.
Crystal connect terminal for main clock OSC.
Screen mode control signal output terminal to timing control IC.
65
SUB CLOCK
CLOCK
-
-
- 64 -
TO CONTENTS
TO SCHEMATIC
