17
-EN
Turning Power On or Off
Some of this unit’s functions cannot be performed while the vehicle is in
motion. Be sure to stop your vehicle in a safe location and apply the
parking brake, before attempting these operations.
1
Turn the ignition key to the ACC or ON position.
The system turns on.
• When turned on, the system displays the last screen that was
displayed before the ignition key was turned off. For example, if
the unit is in radio mode when ignition is turned off, it will remain
in radio mode when ignition is turned back on.
2
Press and hold the
MENU/ (Power Off)
button for at least
5 seconds to turn the power off.
• The unit can be turned on by pressing any button.
• The unit is a precision device. Careful handling of the unit should
provide you with years of trouble-free operation.
Turning the System On
When the system is used for the first time, the language
selection menu is displayed. Swipe the Language list screen
vertically, then touch your choice from the list of 23
languages.
• Some of this unit’s functions cannot be performed while the vehicle is in
motion. Be sure to stop your vehicle in a safe location and apply the
parking brake before attempting these operations.
Initial System Start-Up
Be sure to press the
RESET
switch when using the unit for the first time,
after changing the car battery, etc.
1
Turn off the unit power.
2
Press the
RESET
switch with a ballpoint pen or similar
pointed object.
For X208U/INE-W977HD
For X209D
Adjusting the Volume
Adjust the volume by pressing
/
or
/ .
Volume decreases/increases continuously by pressing and holding
/
or
/
.
Volume: 0 - 35
Lowering Volume Quickly
Audio Mute function instantly lowers the volume level to 0.
1
Press
/
or
/ to display the Volume adjunstment
screen.
2
Touch the speaker icon to activate the MUTE mode and
the speaker icon change to
.
The audio level will be 0.
3
Press and hold
or button continuously to increase
the volume.
RESET switch
RESET switch
