Alpine INE-W967HD, Quick Reference Manual

Page: 197 / 255

42
3.1.8 Planning a Multipoint Route
To build your route destination-by-destination, perform the following steps:
1. Press the navigation hardkey button to access the Navigation menu.
2. Tap .
3. There is only one line in the list of route points, the starting point of the route, which is normally the
current GPS position.
4. Tap to select the destination.
5. The New Route to... screen appears, where you can select the destination of the route the same
way as described in the previous sections.
6. If needed, you can add further intermediate destinations.
7. To add more route points, tap or tap to change the final
destination. The Add to Route... menu appears again, where you can select the new route point
the same way as you have set the destination before.